HD444S85 Single Brush Grapple

Price: $5,095.00
  • Item #: HD444S85
* Marked fields are required.
*
*
*
*
*
*
*
Qty: *

Price on this item does not include shipping - this item does qualify for reduced shipping cost, shipping cost calculated at checkout and includes shipping to locations with normal delivery access in the continental U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost, e-mail us for a shipping quote if needed. 

*We have a credit card sales limit of $2500.00 or less.  All orders over $2500.00 should be paid for by personal, business, or cashier's check or postal money order only. 

All items paid for by credit card and shipped by UPS are sent signature required.  If no one will be at the location for delivery, then payment should be by check, so the package can be delivered without a signature. 

Someone must be at the location on all shipments sent by motor freight (truck). 

Features/Specifications

Model HD444S85 single brush grapple rake 85 inches wide, for medium and large tractor loaders and skid steer loaders.  Requires optional mounting brackets (see index, brackets available for John Deere 400, 500, 600, and 700 series loaders, and skid steer quick attach plate for universal skid steer quick attach compatable loaders).

Model HD444S85SS includes skid steer brackets and couplers, see the drop down menu above to order this model instead if you want to mount this on a skid loader.

  • Heavy duty grapple available in widths of 72 and 85 inches, grapple has a large vertical opening distance of 70 inches with tines fully open

  • Designed for larger skid loaders and tractor loaders with up to 3000 lbs. lift capacity

  • 6 inch spacing between tines, rake made out of 3/4 inch steel, points on end of tines to go below the ground to pick up brush piles cleanly off of ground

  • Unit is fully plumbed with hose protection, cylinders are also protected by being concealed within the grapple frame

  • Available in both single and double grapple models

  • Mounting brackets are required and will have to be welded to back of frame of unit

    Model HD444S85: 85 inch wide single grapple model, has two cylinders, all cylinders are enclosed, comes with hoses, only requires one hydraulic outlet (2 hoses to plug in), you have to supply quick couplers as well as mounting brackets, see our available brackets below, wt. is 1142 lbs.
     

If needed, several optional selector valve kits are shown (see photos) if you do not have an open port on your main loader control valve, then use a selector valve to splt the hydraulic flow back and forth between two circuits, such as the tilt cylinders on your loader and the grapple. Loader control valves/valve kits can be ordered in the drop down menu on this order page.

Model MP020 Electric selector valve kit, including solenoid selector valve, 15 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 16 lbs.


Model MP010 Electric selector valve kit, including solenoid selector valve, 24 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 18 lbs.


Model MP030 Electric selector valve kit, contains two stacked valves 24 gpm, a typical application would be if you have only one hydraulic outlet and you have three hydraulic functions to perform such as a blade, lift, angle, and tilt, this kit would allow you to perform all three functions with a single set of hydraulic outlets, includes two stacked valves, 16 fittings, 3 position in dash switch, wiring harness, and mounting bracket, wt. is 25 lbs.

The electric selector valves can be mounted more remotely as they come with a wiring harness and switch to operate them. The MP030 valve is a double valve used if you need two sets of extra outlets.

Also available is our part number WK96765 single bank control valve.  If you have an extra outlet, or want to plumb a dedicated control valve for the grapple function, then this is the valve needed.