Model HD444S72 heavy duty single brush grapple for medium and large tractor loaders and skid steer loaders. Mounting brackets required, see our index, e-mail us for brackets not listed.
Click To Enlarge

HD444S72 Single Brush Grapple

Price: $4,895.00
  • Item #: HD444S72
* Marked fields are required.
Qty: *

Shipping not included on this item - Reduced shipping cost however does apply, shipping calculated at checkout.  Shipping amount listed will be for shipping to points in the U.S. 48 states to locations with normal delivery access; locations in Alaska, Hawaii, and outside the U.S. will require additional shipping cost, constact us for a quote if needed.

 All items paid for by credit card and shipped by UPS are sent signature required.  If no one will be at the location for delivery, then payment should be by check, so the package can be delivered without a signature. 

Someone must be at the location on all shipments sent by motor freight (truck). 


Model HD444S72 single heavy duty brush grapple for medium to large tractor and skid steer loaders.  Has one single grapple tooth with two enclosed hydraulic cylinders.  Cylinders are enclosed to protect them; includes hoses, with threaded ends (without quick couplers).  Hoses are plumbed together, only one hydraulic outlet is needed.

  • Heavy duty grapple available in widths of 72 and 85 inches, grapple has a large vertical opening distance of 70 inches with tines fully open

  • Designed for larger skid loaders and tractor loaders with up to 3000 lbs. lift capacity

  • 6 inch spacing between tines, rake made out of 3/4 inch steel, points on end of tines to go below the ground to pick up brush piles cleanly off of ground

  • Unit is fully plumbed with hose protection, cylinders are also protected by being concealed within the grapple frame

  • Available in both single and double grapple models

  • Mounting brackets are required and will have to be welded to back of frame of unit, several sets are listed in our index, contact us for any loaders not shown. 

    Model HD444S72: 72 inch wide single grapple model, has two cylinders, all cylinders are enclosed, comes with hoses, only requires one hydraulic outlet (2 hoses to plug in), you have to supply quick couplers as well as mounting brackets, see our available brackets below, wt. is 1133 lbs.

If needed, several optional selector valve kits are shown (see photos) if you do not have an open port on your main loader control valve, then use a selector valve to splt the hydraulic flow back and forth between two circuits, such as the tilt cylinders on your loader and the grapple. Loader control valves/valve kits can be ordered in the drop down menu on this order page.

Model MP020 Electric selector valve kit, including solenoid selector valve, 15 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 16 lbs.

Model MP010 Electric selector valve kit, including solenoid selector valve, 24 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 18 lbs.

Model MP030 Electric selector valve kit, contains two stacked valves 24 gpm, a typical application would be if you have only one hydraulic outlet and you have three hydraulic functions to perform such as a blade, lift, angle, and tilt, this kit would allow you to perform all three functions with a single set of hydraulic outlets, includes two stacked valves, 16 fittings, 3 position in dash switch, wiring harness, and mounting bracket, wt. is 25 lbs.

The electric selector valves can be mounted more remotely as they come with a wiring harness and switch to operate them. The MP030 valve is a double valve used if you need two sets of extra outlets.

Also available is model WK96765 single bank selector valve (see drop down menu); if you want a dedicated control valve and have an extra outlet or will plumb it into your system permanently, choose this valve.