Model HD444D85 double brush grapple, 85 inches wide, mounting brackets required (see our index), for medium and large tractor loaders and skid loaders, up to 3000 lbs. lift capacity.
Click To Enlarge

HD444D85 Double Brush Grapple

Price: $5,095.00
  • Item #: HD444D85
* Marked fields are required.
Qty: *

Price on this item DOES NOT include shipping, this item qualifies for reduced shipping cost to your location. Shipping cost calculated at checkout.  Shipping costs shown are for shipping to locations with normal delivery access in the continental U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost, e-mail us for a shipping quote if needed. 

For Truck shipments, you must be able to unload the items at the delivery point (lift gate service is extra, please order if needed). Delivery pickup at the terminal can also be requested.

*We have a credit card sales limit of $2500.00 or less. All orders over $2500.00 should be paid for by personal, business, or cashier's check or postal money order only.


Model HD444D85 double Grapple rake for medium and large tractors and skid steer loaders.  Grapple is 85 inches wide, optional mounting brackets required (see our index, brackets available for JD 400, 500, 600, and 700 series loaders as well as tractor loaders and skid steer loaders with skid steer universal quick attach style bucket connections).

See the drop down menu above to order the Model HD444D85SS designed for mounting to a skid steer connection

Heavy duty grapple available in widths of 72 and 85 inches, grapple has a large vertical opening distance of 70 inches with tines fully open.

  • Designed for larger skid loaders and tractor loaders with up to 3000 lbs. lift capacity

  • 6 inch spacing between tines, rake made out of 3/4 inch steel, points on end of tines to go below the ground to pick up brush piles cleanly off of ground

  • Unit is fully plumbed with hose protection, cylinders are also protected by being concealed within the grapple frame

  • Available in both single and double grapple models

  • Mounting brackets are required and will have to be welded to back of frame of unit

Model HD444D85: 85 inch wide double grapple model, has two cylinders, all cylinders are enclosed, comes with hoses, only requires one hydraulic outlet (2 hoses to plug in), you have to supply quick couplers as well as mounting brackets, see our available brackets below, wt. is 1354 lbs., ships by truck.

If needed, several optional selector valve kits are shown (see photos) if you do not have an open port on your main loader control valve, then use a selector valve to splt the hydraulic flow back and forth between two circuits, such as the tilt cylinders on your loader and the grapple. Loader control valves/valve kits can be ordered in the drop down menu on this order page. 

Model MP020 Electric selector valve kit, including solenoid selector valve, 15 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 16 lbs.

Model MP010 Electric selector valve kit, including solenoid selector valve, 24 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 18 lbs.

Model MP030 Electric selector valve kit, contains two stacked valves 24 gpm, a typical application would be if you have only one hydraulic outlet and you have three hydraulic functions to perform such as a blade, lift, angle, and tilt, this kit would allow you to perform all three functions with a single set of hydraulic outlets, includes two stacked valves, 16 fittings, 3 position in dash switch, wiring harness, and mounting bracket, wt. is 25 lbs.

The electric selector valves can be mounted more remotely as they come with a wiring harness and switch to operate them. The MP030 valve is a double valve used if you need two sets of extra outlets.

Also available is a single bank control valve if you either have an open outlet and want a separate control valve, or want to plumb one into the system you can use this type of valve.