Model HD444D72 heavy duty double grapple, 72 inches wide for medium and large tractor loaders and skid steer loaders, requires mounting brackets, optional selector valves also shown.
Click To Enlarge

HD444D72 Double Brush Grapple

Price: $4,895.00
  • Item #: HD444D72
* Marked fields are required.
Qty: *

Free Shipping on this item to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping charges. Locations with limited access may require pickup at your local terminal for free shipping.

For Truck shipments, you must be able to unload the items at the delivery point (lift gate service is extra, please order if needed). Delivery pickup at the terminal can also be requested.

*We have a credit card sales limit of $1500.00 or less. All orders over $1500.00 should be paid for by personal, business, or cashier's check, postal money order(s) or finance contract (see our web page for financing options).

All items paid for by credit card and shipped by UPS are sent signature required. If no one will be at the location for delivery, then payment should be by check, so the package can be delivered without a signature.


To order model HD444D72SS Skid Steer Mount Model, see the drop down menu above.

Model HD444D72 heavy duty double grapple for medium and large tractor and skid steer loaders.  Unit is 72 inches wide with two independent grapple sections.  All cylinders are enclosed for protection, hoses are plumbed together so only one hydraulic outlet is needed.

Unit includes hoses, but DOES NOT come with quick coupler fittings.  Unit also requires purchase of mounting brackets.  Several bracket sets are available (see our index), and many others are available; if necessary, e-mail us the make and model of your loader for cost of brackets.

  • Heavy duty grapple available in widths of 72 and 85 inches, grapple has a large vertical opening distance of 70 inches with tines fully open

  • Designed for larger skid loaders and tractor loaders with up to 3000 lbs. lift capacity

  • 6 inch spacing between tines, rake made out of 3/4 inch steel, points on end of tines to go below the ground to pick up brush piles cleanly off of ground

  • Unit is fully plumbed with hose protection, cylinders are also protected by being concealed within the grapple frame

  • Available in both single and double grapple models

  • Mounting brackets are required and will have to be welded to back of frame of unit

    Model HD444D72: 72 inch wide double grapple model, has two cylinders, all cylinders are enclosed, comes with hoses only requires one hydraulic outlet (2 hoses to plug in), you have to supply quick couplers as well as mounting brackets, see our available brackets below, wt. is 1260 lbs.

If needed, several optional selector valve kits are shown (see photos) if you do not have an open port on your main loader control valve, then use a selector valve to splt the hydraulic flow back and forth between two circuits, such as the tilt cylinders on your loader and the grapple. Loader control valves/valve kits can be ordered in the drop down menu on this order page.

Model MP020 Electric selector valve kit, including solenoid selector valve, 15 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 16 lbs.

Model MP010 Electric selector valve kit, including solenoid selector valve, 24 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 18 lbs.

Model MP030 Electric selector valve kit, contains two stacked valves 24 gpm, a typical application would be if you have only one hydraulic outlet and you have three hydraulic functions to perform such as a blade, lift, angle, and tilt, this kit would allow you to perform all three functions with a single set of hydraulic outlets, includes two stacked valves, 16 fittings, 3 position in dash switch, wiring harness, and mounting bracket, wt. is 25 lbs.

The electric selector valves can be mounted more remotely as they come with a wiring harness and switch to operate them. The MP030 valve is a double valve used if you need two sets of extra outlets.

Also available is a single bank hydraulic control valve; if you have an open outlet and/or want to plumb a separate control valve specfically for controlling the grapple, then choose this option