Model H40-072 tractor mounted, pto powered finish cut type flail mower with 72 inch cutting width, offset mounted 6.5 inches to the right, for tractors from 15 to 40 hp.
Click To Enlarge

H40-072 Tractor Mounted Finish Type Flail Mower 72"

Price: $4,115.00
  • Item #: H40-072
* Marked fields are required.
*
*
Qty: *

Free Shipping on this item to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping charges. Locations with limited access may require pickup at your local terminal for free shipping.

For Truck shipments, you must be able to unload the items at the delivery point for free shipping, (lift gate service is extra, please order if needed). Delivery pickup at the terminal can also be requested, and would be free shipping also.

*We have a credit card sales limit (see home page or checkout page for limit). All orders over the limit should be paid for by personal, business, or cashier's check, postal money order(s) or finance contract (see our web page for financing options).

All items paid for by credit card must be shipped to the billing address of the credit card and if shipped by UPS or Fedex, are sent signature required. If no one will be at the location for delivery, then payment should be by check, so the package can be delivered without a signature.

Features/Specifications

Model H40-072 finish type, tractor mounted (category 1 hitch), 540 rpm pto powered, flail mower with 72 inch wide cut, and cutting height adjustable from 1 to 5 inches.  Unit is offset mounted to right 6.5 inches.

The Hurricane H40 Series Flail Mowers are high quality flail mowers which will allow you to cut large areas efficiently with less manpower, and give you the finish cut you need for parks and recreation areas, fairways, athletic fields, and large acreages with good quality turf. The many quality engineered features on these tractor mounted flail finishing/grooming mowers will give you many hours of use without maintenance or repair. The H40 series flail mower is available in cutting widths of 48 inches, 60 inches, and 72 inches, and is designed to be powered from the 540 rpm pto of tractors with 15-40 hp. The H40 series mowers are mounted offset to the right of center on the hitch as follows: H40-48 three inches; H40-060 eight and one half inches; H40-072 six and one half inches.

Click Here For Video On Hurricane Flail Mowers

  • Cutting heights from 1 inch to 5 inches

  • Choice of fine cut knives at 90 degree angles, or reversible Y blades

  • Dethatching blades available

  • High blade tip speed

  • Has precise blade overlap

  • Adjustable cutting height roller with scraper

  • These mowers can be used for the best finish cut, and for heavy weeds, and small branches no more than 1/2 inches and twigs

  • Flai mowers offer a good alternative when safety is a concern (no side discharge of rocks or other objects)

  • Heavy duty shielded PTO shaft (1 3/8 inch ASAE cat 3)

  • Sealed rotor bearings

  • Can be mounted on the front or rear of tractors

  • Electronically balanced rotor

  • Heavy duty, one piece, balanced steel pulleys

  • 2 Heavy duty reinforced notched belts

  • Automatic belt tensioner

  • 3 point linkage, cat 1

  • Floating top link

  • Units are mounted offset to the right on the hitch as follows: 3 inches on H40-048; 8.5 inches on H40-060; 6.5 inches on H40-072

  • Highly engineered gearbox with cooling fins

  • Model H40-072: 72 inch cutting width, 78 inch overall width, 528 lbs. (563 lbs. shipping weight), rotor rpm of 2278, blade tip speed of 8917 ft./minute, has 76 blades

  • Two options are available in the drop down menu on this order page:  the standard driveline has a shear pin safety, you can upgrade to a slip clutch pto shaft; also available are side slids to help support the mower in addition to the roller