Model 333000 tractor loader mount or skid steer loader mounted brush grapple. Mounting bracket required, see our index. For small and medium sized tractors and skid loaders.
Click To Enlarge

333S60 Brush Rake Grapple

Price: $1,995.00
  • Item #: 333S60
* Marked fields are required.
*
*
*
*
*
*
Qty: *

Free Shipping on this item to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping charges. Locations with limited access may require pickup at your local terminal for free shipping.

For Truck shipments, you must be able to unload the items at the delivery point (lift gate service is extra, please order if needed). Delivery pickup at the terminal can also be requested.

*We have a credit card sales limit of $1500.00 or less. All orders over $1500.00 should be paid for by personal, business, or cashier's check, postal money order(s) or finance contract (see our web page for financing options).

All items paid for by credit card and shipped by UPS are sent signature required. If no one will be at the location for delivery, then payment should be by check, so the package can be delivered without a signature.

Features/Specifications

Model 333S60 Brush Rake Grapple for attaching to small to medium skid steer loaders and tractor loaders that are universal skid steer quick attach compatable (you can connect skid steer attachments to the loader arms).

YOU WILL ALSO NEED TO ORDER PART NUMBER SS1100 UNIVERSAL WELD-ON SKID PLATE TO MOUNT THIS GRAPPLE (see our index).

The Brush Rake Grapple Rake mounts on the loader arms of your skid steer or tractor loader. The model 333000 is specifically designed for small and medium utility tractors and skid loaders up through approximately 45 hp.; width is 60 inches. The unit comes without mounting brackets or skid plate which must be welded to the unit (some loader brackets may be able to be attached by U-Bolts but it is best to weld the bracket to the Brush Rake).

  • Rake construction is of 1/2 inch steel plate and weighs approximately 300 lbs., leaving plenty of lifting capacity on your skid steer or tractor

  • The brush rake is 60 inches wide, with 9 rake tines, the grapple teeth open to give you a 52 inch tall opening

  • The brush rake can be mounted to most small and medium sized skid steer loaders and tractor loaders; it comes WITHOUT LOADING BRACKETS, we have most available. Brackets have to be purchased separately and then welded on.

  • Model 333S60:  Brush Rake Grapple, 60 inches wide, fits most loaders on small to medium utility tractors and skid steers, wt. is 398 lbs.

If needed, several optional selector valve kits are shown (see photos) if you do not have an open port on your main loader control valve, then use a selector valve to splt the hydraulic flow back and forth between two circuits, such as the tilt cylinders on your loader and the grapple. Loader control valves/valve kits can be ordered in the drop down menu on this order page.

Model MP020 Electric selector valve kit, including solenoid selector valve, 15 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 16 lbs.


Model MP010 Electric selector valve kit, including solenoid selector valve, 24 gpm capacity, 12 fittings, switch, wiring harness, and mounting brackets, wt. is 18 lbs.


Model MP030 Electric selector valve kit, contains two stacked valves 24 gpm, a typical application would be if you have only one hydraulic outlet and you have three hydraulic functions to perform such as a blade, lift, angle, and tilt, this kit would allow you to perform all three functions with a single set of hydraulic outlets, includes two stacked valves, 16 fittings, 3 position in dash switch, wiring harness, and mounting bracket, wt. is 25 lbs.

The electric selector valves can be mounted more remotely as they come with a wiring harness and switch to operate them. The MP030 valve is a double valve used if you need two sets of extra outlets.