Model 111155 Single Add-A-Grapple Brush Grapple
Click To Enlarge

111155 Bucket Grapple 36 To 55" Wide Buckets

Price: $735.00
  • Item #: 111155
* Marked fields are required.
*
*
Qty: *

Price on this item DOES NOT include shipping; shipping added at checkout, and is for locations in the 48 states, locations in Alaska, Hawaii and elsewhere require additional shipping cost. Please request a shipping quoted if needed.

If this is a Truck Shipment; for the shipping cost shown you must be able to unload the items at the delivery point. The drop down menu on the order page lists additional delivery options and services and their cost if any.

*We have a credit card sales limit (see limit amount at checkout, or see our home page). If your order exceeds this amount, then the order should be paid for by personal, business, or cashier's check, postal money order, finance contract or bank wire.

Orders paid for by credit card will be shipped to the card's billing address only. If you enter a different shipping address you will need to re-enter the order to pay by credit card.

If the card's billing address is a P.O. Box, or you want your order shipped to a different address, then please pay by check, money order or wire transfer.

All items paid for by credit card and shipped by UPS are sent signature required. If no one will be at the location for delivery, then payment should be by check, so the package can be delivered without a signature.

Features/Specifications

We currently have a 2 week lead time on this item

Model 111155 Add-A-Grapple bucket grapple for 36" to 55" wide buckets on small tractors.  Grapple bolts onto the tractor's bucket, is single grapple model, comes complete with hydraulic cylinder, customer must supply hydraulic hoses and fittings.  Grapple teeth assembly and cylinder can be removed by pulling several pins (mounting bar stays bolted to top edge of bucket, unless you need to remove it). 

The Add-A-Grapple models are designed to pick-up brush, debris, logs, almost anything that you can pick up in your bucket.  Single cylinder model two way cylinder requires connect of two hoses (1 auxillary hydraulic outlet).  If you do not have an open hydraulic outlet, then listed in accessories are two optional, available selector valves to allow you to connect into the loaders hydraulic valve so you can operate the grapple.

Grapple ships unassembled by FedEx ground service., wt. is 125 lbs.

If you are ordering a grapple and need a manual or electric selector valve, order them in the drop down menu on this order page.

The selector valves allow you to switch the hydraulic flow from one of your hydraulic outlets on your loader control back and forth between the two circuits (the tilt cylinders on the loader (we recommend) and the grapple).

One control lever on your loader valve will now be able to control each circuit by switching back and forth using the selector valve.

The valve is available in a manual valve, as well as 3 different electric models.  If you do not have enough hydraulic outlets for all functions, then using a selector valve is usually the easiest way to connect all hydraulic circuits (hoses) to the system.

Model MP215 works for most applications and is a manual valve.  MP020 is an electric valve kit for hydraulic systems with a maximum of 15 gpm or less.  Model MP010 is an electric selector valve kit for hydraulic systems with up to 24 gpm capacity.  Normally these three valves are what is needed.  The kits (MP020 and MP010 and MP030) come with mounting brackets, wiring harness, fittings, and hardware.  The MP215 manual valve is just the valve.

The MP030 is a special double stack valve kit with 24 gpm capacity.  This is needed if you have only one hydraulic outlet but you have THREE functions (example connect to tilt cylinders, the grapple, plus one other function).  This valve is normally not needed on the grapple applications, but is available).

 

 

 

 

 

 

 

 

 

frtcde210